产品搜索器
-
Filter by market and by application
-
Building & Construction
51
- All Building & Construction 51
- Adhesives, Caulks & Sealants 21
- Aluminum Cladding 5
- Carpet Backing 3
- Ceiling Paint 1
- Cured-In-Place-Pipe 2
- Elastomeric Roof Coatings 4
- Foam Insulation 3
- Gas Line Sheathing 2
- Paints & Coatings 15
- Partitions and Wall Boards 5
- Plaster / Stucco 1
- Roofing Membrane (High-End) 6
- Roofing 8
- Solvent-Based Elastomeric Roof Coatings 1
- TPO Roofing 6
- Tunnel Construction Cladding 6
- E & E, Infrastructure 13
- Industrial 44
- Thermoplastics 67
- Thermosets 85
- Transportation 42
- Wire & Cable 45
-
Building & Construction
51
Search narrowed by:
173 product grades found
SB 136
SB-136 aluminum hydroxide is a ground high whiteness grade with an average median particle size of 18.5 microns.
SB 30
SB-30 aluminum hydroxide is a coarse grade which imparts fire retardance in textured coatings such as exterior insulation finish systems.
SB 332
SB-332 aluminum hydroxide is a ground high whiteness flame retardant with an average median particle size of 11 microns.
SB 336
SB-336 aluminum hydroxide is a ground high whiteness flame retardant with an average median particle size of 15.5 microns in adhesives, caulks and sealants applications.
SB 36
SB-36 aluminum hydroxide is a ground high whiteness flame retardant with an average median particle size of 25 microns in adhesives, caulks and sealants applications.
SB 432
SB-432 aluminum hydroxide is a ground high whiteness flame retardant with an average median particle size of 9 microns in adhesives, caulks and sealants applications.
SB 632
SB-632 aluminum hydroxide is a ground high whiteness flame retardant with an average median particle size of 3.5 microns.
SB 805
SB-805 aluminum hydroxide is ground aluminum hydroxide with an average median particle size of 2.5 microns.
Safire ® 400
Safire® 400 nitrogen-phosphorus technology is a Melamine Poly (Zinc Phosphate) fire retardant and smoke suppressant recommended for Polyamide 6,6 (PA66).
SpaceRite ® S11
Spacerite® S-11 aluminum hydroxide is an ultra high brightness precipitated aluminum hydroxide grade with a median particle size of about 0.25 microns used to extend glossy coatings.
SpaceRite ® S3
Spacerite® S-3 aluminum hydroxide is an ultra high brightness precipitated aluminum hydroxide with a median particle size of about 1 micron in coatings applications.
Vertex ® 100
Vertex® 100 magnesium hydroxide is a fine particle size untreated product for fire rated thermoplastic and elastomeric compounds.
Vertex ® 100SA
Vertex® 100 SA is an aminosilane-treated product that provides superior fire performance and enhanced mechanical properties when used to make fire-rated polymeric compounds. The silane treatment promotes coupling of the magnesium hydroxide to the polymer used, providing high dispersion quality and thus enhanced compound performance especially for the high-loading applications. Vertex 100SA can be used in polyolefins and polyamides such as Nylon 6 and Nylon 6,6.
Vertex ® 100SP
Vertex® 100 SP magnesium hydroxide is a fine particle size vinyl silane-treated grade.
Vertex ® 100ST1
Vertex® 100 ST1 magnesium hydroxide is a fine particle size fatty acid-treated grade.
Vertex ® 60HST
Vertex® 60 HST magnesium hydroxide is a fatty acid treated grade.
Vertex ® 60
Vertex® 60 magnesium hydroxide is an untreated flame retardant for fire-rated thermoplastic compounds.
Vertex ® 60 SV
Vertex® 60 SV magnesium hydroxide is a product with a proprietary surface treatment to allow for high loadings in polyolefin applications such as plastic pallets and rubbish containers.
Zerogen ® 100 SP
Zerogen® magnesium hydroxide products provide excellent fire retarding and smoke suppression performance for the thermoplastic and elastomeric compounds. The Zerogen® 100 products are characterized by higher chemical purity compared to Zerogen® 50 products and therefore provide further enhanced performance in compound applications where superior electrical properties are needed, e.g. cable primary insulation materials. Zerogen® 100 SP is an ultrafine particle size; low surface area magnesium hydroxide with vinylsilane treatment designed to provide excellent compounding rheology, high-quality powder dispersion and enhanced compound mechanical properties in such polymers as polyolefins, EPR/EPDM and other elastomers.
Zerogen ® 100 SVT
Zerogen® magnesium hydroxide products provide excellent fire retarding and smoke suppression performance for the thermoplastic and elastomeric compounds. The Zerogen® 100 SVT products are characterized by high chemical purity thus suitable for use in the compound applications where excellent electrical properties are needed, such as in cable insulation materials. Zerogen® 100 SVT is an ultrafine particle size magnesium hydroxide with a proprietary surface treatment that provides superior fire performance when used to make fire-rated EVA compounds. The proprietary surface treatment improves smoke suppression efficiency of magnesium hydroxide and increases limiting oxygen index (LOI) of the EVA compound. As a result, lower magnesium hydroxide loading level can be used leading to enhanced rheological and processing performance, and improved compound mechanical properties. The surface treatment also promotes compatibility of the magnesium hydroxide with the polymer and high quality of dispersion.
Zerogen ® 50
Zerogen® 50 is an untreated magnesium hydroxide which can be used in polyolefins, EPR/EPDM, PVC and certain engineering thermoplastics such as polyamides to make zero-halogen or low-smoke compounds.
Zerogen ® 50 SP
Zerogen® 50 SP is a vinyl silane-treated product designed to provide excellent compounding rheology and high-quality dispersion into such polymers as polyolefins, EPR/EPDM and other elastomers. The vinyl silane treatment also improves mechanical properties.
Zerogen ® 50 SV
Zerogen® 50 SV is a magnesium hydroxide with a proprietary surface treatment that provides superior fire performance when used to make fire-rated EVA compounds. The proprietary surface treatment improves smoke suppression efficiency of magnesium hydroxide and increases limiting oxygen index (LOI) of the EVA compound. As a result, lower magnesium hydroxide loading level can be used leading to enhanced rheological and processing performance, and improved compound mechanical properties. The surface treatment also promotes compatibility of the magnesium hydroxide with the polymer and high quality of dispersion.