产品搜索器
-
Filter by market and by application
-
Building & Construction
46
- All Building & Construction 46
- Adhesives, Caulks & Sealants 21
- Aluminum Cladding 5
- Carpet Backing 3
- Ceiling Paint 1
- Cured-In-Place-Pipe 2
- Elastomeric Roof Coatings 4
- Foam Insulation 3
- Gas Line Sheathing 2
- Paints & Coatings 10
- Partitions and Wall Boards 5
- Plaster / Stucco 1
- Roofing Membrane (High-End) 6
- Roofing 8
- Solvent-Based Elastomeric Roof Coatings 1
- TPO Roofing 6
- Tunnel Construction Cladding 6
- E & E, Infrastructure 10
- Industrial 6
- Thermoplastics 47
- Thermosets 65
- Transportation 2
- Wire & Cable 45
-
Building & Construction
46
Search narrowed by:
99 product grades found
Kemgard ® 1100
Kemgard® 1100 molybdate complex is a finer particle size zinc molybdate/magnesium silicate complex used in partitions and wall boards requiring plenum rating and improved mechanical properties.
Kemgard ® 605
Kemgard® 605 molybdate complex is a cost-effective grade offering balanced fire retardance and smoke suppression in PVC-related applications.
Kemgard ® 620
Kemgard® 620 molybdate complex is an excellent fire retardant and smoke suppressant in PVC-related applications and is designed for processing temperatures at <200℃.
Kemgard ® 631
Kemgard® 631 molybdate complex is a highly effective smoke suppressant for flexible and rigid PVC applications. It provides excellent LOI performance.
Kemgard ® 911B
Kemgard® 911B molybdate complex is a cost-effective calcium molybdate zinc complex smoke suppressant for use in printed circuit boards.
Kemgard ® 911B UF
Kemgard® 911B UF molybdate complex is a cost-effective calcium molybdate zinc complex smoke suppressant for use in printed circuit boards.
Kemgard ® 911C
Kemgard® 911C molybdate complex is a zinc molybdate/magnesium silicate complex used in partitions and wall boards where smoke suppression is required.
Kemgard ® 928
Kemgard® 928 molybdate complex is a zinc molybdate/magnesium hydroxide complex for use in rigid PVC injection molding and extrusion applications requiring smoke suppression and higher impact resistance.
Kemgard ® 981
Kemgard® 981 molybdate complex is a zinc molybdate/magnesium hydroxide complex for use in epoxy requiring smoke suppression and higher impact resistance.
Kemgard ® MZM
Kemgard® MZM molybdate complex is a zinc molybdate/magnesium hydroxide complex used in partitions and wall boards where smoke suppression is required.
Martinal ® OL-104 LEO
Martinal® OL-104 LEO aluminum hydroxide is a 4 m2/g untreated, fine precipitated aluminium hydroxide with improved compounding performance, higher thermal stability, better powder flowability and higher bulk density after conveying.
Martinal ® OL-107 LEO
Martinal® OL-107 LEO aluminum hydroxide is a 7 m2/g untreated, fine precipitated aluminium hydroxide with improved compounding performance, higher thermal stability, better powder flowability and higher bulk density after conveying and lower compound viscosity.
Martinal ® OL-111 LE
Martinal® OL-111 LE aluminum hydroxide is an untreated, high surface area, fine precipitated aluminium hydroxides with a very low content of soluble electrolytes for demanding requirements (i.e. in the electrical and electronic industries), produced in Bergheim, Germany.
MoldX ® A300
MoldX® A300 aluminum hydroxide is optimized to provide dramatically improved processing viscosities to sheet molding compounds (SMC) at loadings ranging from 250 phr to greater than 350 phr. It is Huber's highest performing 'low viscosity' grade.
MoldX ® A400
MoldX® A400 aluminum hydroxide is a third generation optimized aluminum hydroxide product that gives low viscosity at a high loading level (250-380 phr), but requires 20-30% less loading than MoldX® A110 to achieve the same flame retardant performance.
HN 100
HN 100 aluminum hydroxide is a versatile, unground and high whiteness grade with an average median particle size of 75 microns, produced in Europe for applications requiring a course-particle size.
HN 336
HN 336 aluminum hydroxide is a versatile, ground and high whiteness grade with an average median particle size of 14 microns, produced in Europe for coatings-related applications.
HN 36
HN 36 aluminum hydroxide is a versatile, ground and high whiteness grade with an average median particle size of 20 microns, produced in Europe for coatings-related applications.
HN 434
HN 434 aluminum hydroxide is a versatile, ground and high whiteness grade with an average median particle size of 10 microns, produced in Europe for coatings-related applications.
HN 532
HN 532 aluminum hydroxide is a versatile, ground and high whiteness grade with an average median particle size of 6 microns, produced in Europe for coatings-related applications.
Hydral ® 710
Hydral® 710 aluminum hydroxide is a precipitated ultrafine aluminum hydroxide flame retardant with low surface area.
Hydral ® 5
Hydral® Coat 5 aluminum hydroxide is a high performing, untreated precipitated ultrafine white aluminum hydroxide powder with a median particle size of 0.5 microns and uniform particle size distribution. It is a spray-dried product.
Hydral ® 7
Hydral® Coat 7 aluminum hydroxide is a high performing, untreated precipitated ultrafine white aluminum hydroxide powder with a median particle size of 0.7 microns and uniform particle size distribution. Hydral Coat 7 is a fully de-agglomerated powder.
Hydral ® 8
Hydral® Coat 8 aluminum hydroxide is a high performing, untreated precipitated ultrafine white aluminum hydroxide powder with a median particle size of 0.8 microns and uniform particle size distribution. Hydral Coat 8 is a fully de-agglomerated powder.
Hydral ® PGA - SD
Hydral® PGA - SD aluminum hydroxide is a precipitated ultrafine aluminum hydroxide flame retardant with low surface area.
Hymod ® M632 SP
Hymod® M632 SP aluminum hydroxide has proprietary surfactant treatments and an average particle size of 3.5 microns.
Hymod ® M932 SP
Hymod® M932 SP aluminum hydroxide is a high surface area vinyl silane treated aluminum hydroxide grade with a very precise, ultrafine particle size distribution.
Hymod ® M9400 SG
Hymod® M9400 SG aluminum hydroxide is a hydrophobic aluminum hydroxide grade with enhanced surface treatment and lot-to-lot consistency.
Hymod ® M9400 SP
Hymod® M9400 SP aluminum hydroxide is a vinyl silane treated, 1.1 micron particle size aluminum hydroxide flame retardant.
Hymod ® SB 336 SE
Hymod® SB336 SE aluminum hydroxide has proprietary surfactant treatments and an average particle size of 15.5 microns.
Hymod ® SB136 SG
Hymod® SB136 SG aluminum hydroxide is a hydrophobic aluminum hydroxide grade with enhanced surface treatment and lot-to-lot consistency for coatings-related applications.
Hymod ® SB36 SG
Hymod® SB36 SG aluminum hydroxide is a hydrophobic grade with enhanced surface treatment for high loadings in sealants and composites.
Hymod ® SB432 SG
Hymod® SB432 SG aluminum hydroxide is a hydrophobic grade with enhanced surface treatment and lot-to-lot consistency for coatings-related applications.
Hymod ® SB432 SP
Hymod® SB432 SP aluminum hydroxide is a vinyl silane treated, 9.1 micron particle size aluminum hydroxide.
Hymod ® SB432 ST1
Hymod® SB432 ST1 aluminum hydroxide is a medium particle size aluminum hydroxide treated with fatty acid.
Magnifin ® H-10 A
MAGNIFIN® H-10 A magnesium hydroxide is a high-purity grade treated with a special vinyl silane coating. The patented process guarantees a regular structure of the cristallite. It is tailor-made for plastic and elastomer applications.
Magnifin ® H-10 C
MAGNIFIN® H-10 C magnesium hydroxide is high-purity grade treated with a special fatty acid coating. The patented process guarantees a regular structure of the cristallite. It is tailor-made for a variety plastic and elastomer applications.
Magnifin ® H-10 IV
MAGNIFIN® H-10 IV magnesium hydroxide is high-purity grade with a high bulk density, surface treated with a special amino polysiloxane. The patented process guarantees a regular structure of the cristallite. It is tailor-made for engineering plastics uses.
Magnifin ® H-10 MV
MAGNIFIN® H-10 MV is high-purity magnesium hydroxide modified with a proprietary surface treatment. The patented process guarantees a regular structure of the cristallite.
Magnifin ® H-10
MAGNIFIN® H-10 magnesium hydroxide is a high-purity grade. It conforms to the standards of the European Pharmacopeia and is tailor-made for plastic applications with low smoke emission and high thermal stability up to 340°C.
Magnifin ® H-10 TV
MAGNIFIN® H-10 TV magnesium hydroxide is high-purity grade combining the positive effect of a vinyl silane coating with improved elongation properties in elastomer applications. The patented process guarantees a regular structure of the cristallite.
Magnifin ® H-5 A
MAGNIFIN® H-5 A magnesium hydroxide is a high-purity grade surface treated with a special vinyl silane coating. The patented process guarantees a regular structure of the cristallite and is tailor-made for plastic and elastomer applications.
Magnifin ® H-5 GV
MAGNIFIN® H-5 GV magnesium hydroxide is a high-purity grade modified with a polymeric surface treatment. The patented process guarantees a regular structure of the cristallite. It is tailor-made for extrusion applications.
Magnifin ® H-5 HV
MAGNIFIN® H-5 HV magnesium hydroxide is a high-purity grade modified with a proprietory polymeric surface treatment. The patented process guarantees a regular crystal structure. It is tailor-made for injection moulding and wiring applications.
Magnifin ® H-5 IV
MAGNIFIN® H-5 IV magnesium hydroxide is a high-purity grade with a high bulk density, surface treated with a special amino polysiloxane. The patented process guarantees a regular structure of the cristallite.
Magnifin ® H-5 MV
MAGNIFIN® H-5 MV magnesium hydroxide is high-purity grade modified with a proprietary surface treatment. The patented process guarantees a regular structure of the cristallite.
Magnifin ® H-5
MAGNIFIN® H-5 magnesium hydroxide is high-purity grade. It conforms to the European Pharmacopeia and is tailor-made for plastic and elastomer applications with low smoke emission and high thermal stability up to 340°C.
Magnifin ® H-5 TV
MAGNIFIN® H-5 TV magnesium hydroxide is high-purity grade combining the positive effect of a vinyl silane coating with improved elongation properties in elastomer applications. The patented process guarantees a regular structure of the cristallite.
Magnifin ® H-7 C
MAGNIFIN® H-7 C magnesium hydroxide is a high-purity grade, treated with a special fatty acid coating. The patented process guarantees a regular structure of the cristallite. The product is tailor-made for plastic and elastomer applications.
Magnifin ® H-7 C3
MAGNIFIN® H-7 C3 magnesium hydroxide is a high-purity grade, treated with a special fatty acid coating. The patented process guarantees a regular structure of the cristallite. The product is tailor-made for plastic and elastomer applications.